- 比利時StuvEX防爆與防火設備
- 美國RCS腐蝕產品監測設備
- 盧森堡ROTAREX羅達萊克斯滅火系...
- 意大利GM SISTEMI火花探測及...
- 西班牙ADIX安迪克斯抑制爆炸系統
- 備盈倍BS&B防爆**系統
- 賀爾碧格Newson Gale防爆靜...
- 賀爾碧格hoerbiger防爆**系...
- 意大利Aircom愛科粉塵防爆設備
- 法國Stif斯緹福粉塵防爆設備
- 西班牙Adix安迪克斯隔爆閥抑制系統...
- 瑞士Rico瑞科爆炸隔離閥
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除塵和防爆產品
- 美國Argus火花和金屬探測以及回收...
- 美國Edwards愛德華消防報警系統
- 美國Kidde凱德廚房滅火和空氣采樣...
- 美國Marioff HI-FOG高壓...
- 挪威納斯克激光氣體分析儀
- 德國Rembe認必泄壓爆破片及隔離塵...
- 英國Amal阻火器
- 英國Marvac呼吸閥和緊急泄放閥以...
- 英國Marston防爆板和爆破片
- 美國ZOOK防爆板
- 瑞士Rico-Ventex隔爆閥
- 德國GreCon格雷康火花探測器以及...
- 德國Eltex埃爾特克斯防爆靜電接地...
- 美國迪康氣體檢測設備
- 美國PAC實驗室和在線分析儀器
- 奧德姆/安姆特儀器產品
- 美盛環境監測行業成套系統工程
- 美盛流體污染控制，過濾，分離凈化產品
- 美國Norman不銹鋼高壓過濾器
- 美國施羅德過濾器以及過濾系統
- 韓國杜科給水設備以及泵系統
- 美國Cameron卡麥龍過程控制和閥...
- 美國BARTON測量儀器儀表
- 美國NUFLO儀表產品
- 美國clif mock采樣設備和系統
- Caldon超聲波技術產品
- 美國Cameron/Barton卡麥...
- 美國Pentail濱特爾油液凈化設備...
- 韓國雷尊泰克REZONTECH火焰探...
- 韓國CSA Bestouch火焰探測...
- 科馬特泰克色譜技術產品
- 英國愛丁堡Edinburgh ins...
- 歐美Cerex/AquaRead等進...
- 歐文凱利自控閥設備
- 德爾格Draeger**檢測設備
- 美國Det-tronics火焰探測器...
- 泵閥控制
- 美國Honeywell生命**產品
- 密析爾濕度和露點儀表
- 美國TIF公司鹵素檢漏儀
- 美國Teledyne Analyti...
- 美國泰科SCOTT健康和**
- 日本日置HIOKI電測產品
- 英國梅克羅尼（MICRONICS）超...
- 美國AII氧分析儀
GD10P IR point Gas detector紅外點式氣體探測儀，Simtronics GD10P 探測器是可燃?xì)怏w檢測近海裝置上的基準。它確立了標準的氣體探測器在**、 穩定和維護成本低的地區。GD10P 有 5 年的保修期。
特性:
- Life-safety performance approved; ATEX EN60079-29-1 & CSA 22.2 No. 152
- 15 years warranty IR sources - solid state optics
- Selectable response rate, without predictive software
- Individually heated sapphire mirror (not conducted heat)
- No field recalibration
- Dual skin weather protector – no filters / gauzes or sinters
- Planned maintenance with HART
The Simtronics GD10P detector is the benchmark for combustible gas detection on offshore installations. It has set the standard for gas detectors in the areas of safety, stability and low maintenance. GD10P comes with 5 years warranty.
The GD10P has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations.
These infrared gas detectors differ from all other models, because they utilise silicon based solid-state infrared sources. The complete optomechanical design and construction is so stable that an ultra fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs.
We offer the longest combined detector and IR source warranty on the market.
For retrofit applications, a bridge interface is available allowing the detector to be connected directly to catalytic systems, using the existing cabling and control modules.
Supplied with worldwide performance and hazardous area approvals. Suitable for use in SIL 2 & SIL 3 systems.
An industry standard HART® interface is used for configuration of the optical fast response time and special fault levels as well as access to extended maintenance data
技術參數:
| GENERAL | |
| Type | Gas detector |
| Product | GD10P |
| Product code | GD10-P00-17DG-0X*-00 |
| Manufacturer | Simtronics |
| GAS DETECTOR | |
| Type | Point Infrared Gas Detector |
| Design principle | IR-absorption, Dual wavelength and dual path |
| IR Source | Solid state (SimSource), 50Hz sampling rate, long life – 15 years warranty |
| Detected gases | Common Hydrocarbons |
| Calibrated range | 0 – 100%LEL Methane (CH4) |
| Weather protector | Two skin baffle arrangement . Sinters, gauzes or hydrophobic filters shall not be used. |
| PERFORMANCE | |
| Lifetime stability | ±5% FS reading (std) |
| Accuracy | ±3% FS between 0-50% reading, ±5% FS between 50-100% reading (std) |
| Response time (5s - std) | T20 = 1.0 sec / T50 = 2.5 sec / T90: 6 sec |
| Response time (1s - fast) | T20 = 0.3 sec / T50 = 0.7 sec / T90 = 1.6 sec (Configured via HART®) |
| Calibration interval | Fixed factory calibrated. No field calibration required. |
| ELECTRICAL | |
| Power supply | 24V DC, range (18 - 32V DC) |
| Power consumption | 140 mA typical |
| Cable entry | 2x M20, one entry with Exe plug |
| Junction box | Integrated Exe junction box. |
| Connection | 0.3 mm2 (22 AWG) - 1.5 mm2 (16 AWG), 3 wires |
| Analogue output signal | 0-20mA, max. load impedance 500?. |
| Fault signalling | Diagnosis signalling in the 0.4 - 3.0mA range. Dirty optics / Early-dirty optics - selectable |
| Maintenance interface | HART 7 |
| ENVIRONMENT | |
| Storage | -40°C to +70°C (-40°F to 158°F) |
| Operation | -40°C to +65°C (-40°F to 149°F) |
| Humidity | 100% RH (non-condensing) |
| Ingress | IP66 / IP67 DIN 40050 |
| RFI/EMI | Complies with EN50081-1 and EN50082-2. |
| HOUSING | |
| Ex Classification | EEx de IIC T6 |
| Material | 316 L stainless steel |
| Weight | 2.9 kg (6.4 lbs) |
| Dimensions | 264L x 104W x 106H (mm)*10.4 x 4.1 x 4.2 (inches) |
| APPROVALS | |
| ATEX | Certificate Nemko 07ATEX1438 |
| IECEx | Certificate IECEx NEM 07.0006 |
| CSA | C22.2 No. 152, Certificate 1773527 |
| SIL | Suitable for use in SIL3 systems |
| Other | ABS, INMETRO (UL variant available) |
| ACCESSORIES | |
| 499-811938 | Duct mount flange kit |
| 499-810874 | Sample flow housing |
| 499-813397 | Mosquito net |
| 499-815712 | Sunshade |
文檔:
Product Sheet GD10P 546.83 KB KB
Product Sheet GD10P (UL version)588.63 KB
Operating Manual854.83 KB
Operating Manual Extended On-Site 271.46 KB
Operating Manual (Italian)821.74 KB
Operating Manual (Portuguese)898.34 KB
Operating Manual (Russian)722.12 KB
Operating Manual (Spanish)887.09 KB
830-810932R02-Outline-Drawing-GD10P.pdf43.1 KB
證書:
ATEX Certification GD10P-GD10PE33.03 KB
CSA Certification138.75 KB
IECEx Certification1.65 MB
Inmetro Certification725.82 KB
CE Declaration185.89 KB
SIL Declaration104.44 KB
ABS Type Approval24.64 KB
MED-B-5901.pdf128.79 KB
MED-D-1352.pdf98.06 KB
UL Certification250.52 KB
應用:
- FPSO / FSO / MOPU
- Marine / Jack Up Rigs
- Oil & Gas Onshore Drilling Rigs
- Chemical and Petrochemical Plants
- Waste Disposal
- Gas Turbines
- General Industry