The MultiTox DMI-TT6 range of detectors are available for a wide range of toxic gases, and is known for its excellent selectivity. For some applications, electrochemical cells are the only solution. The MultiTox DMI-TT6 is also available for Oxygen detection, and is used in several demanding solutions.

The DMI-TT6 and DMI-TO6 are constructed from a common housing and electronics with the detection properties being determined by the type of sensor (cartridge) used. A wide range of cells are available, including hydrogen sulphide, ammonia and carbon monoxide to name a few. The cells are intrisically safe, and may be replaced with the detector powered. This versatile housing is also used for our flammable (catalytic) gas detector as well our semiconductor (MOS) detector - although these units are certified flameproof, not intrinsically safe - see separate datasheet.
The intelligent, microprocessor driven unit is fully configurable using a wireless handheld terminal (TLU) giving true flexibility to the installer. Elements such as relay operation and alarm levels are all set via the TLU, hazardous area approved handheld unit.
The device offers a wide range of output options as standard and is suitable for use in SIL 2 applications. The unit may be interfaced directly with a wide range of panels, controllers and PLC’s etc.
The DMI-TT6 and DMI-TO6 may be used in refineries, offshore driling and production platforms, processing and storage plants as well as chemical plants.

 技術(shù)參數(shù):

GENERAL
Type	Gas detector
Product	Simtronics MultiTox, H2S (EC)
Product code	DMI-TT6-31**
Manufacturer	Simtronics
GAS DETECTOR
Type	Electrochemical cell
Detected gas	Hydrogen Sulphide (H2S)
Calibrated range	20ppm, 50ppm, 100ppm, 200ppm (variants)
PERFORMANCE
Accuracy	±5% of calibrated range
Linearity	±2%
Repeatibility	±1%
Stability	±1% (zero point)
Response time	T50: <30 sec, T90: <120 sec
Calibration interval	3 months (calibration check)
Sensor life	24 months
ELECTRICAL
Power supply	24V DC, range (18 - 32V DC)
Power consumption	30 mA normal; 180 mA during heating
Cable entry	2x M20, one entry with Exd plug
Junction box	“No-touch” field cabling”, detector replaceable without opening cable glands
Connection	0.3 mm2 (22 AWG) - 1.5 mm2 (16 AWG), 3 or 4 wires
Analogue output signal	0-20mA, source, max. load impedance 700?.
Fault signalling	Diagnosis signalling in the 2.0 - 3.4mA range
Relays	2 configurable relays for alarm and fault
Maintenance interface	Wireless (IR) handheld terminal for configuration, test and diagnosis
ENVIRONMENT
Storage	-40°C to +70°C (-40°F to 158°F)
Operation	-20°C to +50°C (-4°F to 122°F)
ATEX	-40°C to +60°C (-40°F to 140°F)
Humidity	95% RH (non-condensing)
Ingress	IP66
RFI/EMI	Complies with EN50081-1, EN50081-2, EN50082-1 and EN50082-2.
HOUSING
Ex Classification	Ex d ia II C T6
Material	Epoxy coated aluminium  or Stainless steel (Specify variant)
Weight	Aluminium: 1.8 Kg (4.0 lbs)   Stainless steel: 6.5 Kg (14.3 lbs)
Dimensions	165H  x 118D x 184W (mm),   6.50H x 4.65D x 7.25W (inches)
APPROVALS
ATEX	Certificate DM LCIE 03 ATEX 6262
ACCESSORIES
TLU600	Infrared remote control unit
AS008-200	Sunshade
AS005	Calibration cup
AS011-2-X	Sample flow housing
AS019	Splash guard

文檔:

 

Product Sheet MultiTox DM TT6338.12 KB

Operating Manual MultiTox Detector2.13 MB

Operating Manual Remote Controller TLU 600/6102.93 MB

證書:

ATEX Certification402.79 KB

應(yīng)用:

Chemical Plants

Pharmaceutical Plants

Automobile Industry

Onshore/Offshore Oil & Gas Platforms

Storage of Toxic Materials